• Light
• Battery (Installed in light)
• 31.8mm Bar Mount Assembly (Quick Release with Quarter Turn)
• Helmet Mount Assembly (Made to be used with GoPro – all parts included)
• 4 x Adhesive Velcro Squares
• Hex Tools (1.5mm/3mm)
• Button Mount/Rubber Shim
• Zip Ties
• 4 x Mount Plate Screws
• Remote Button
• Micro USB Charge Cable
• OTG Cable
• Spare Optic (Wide/Spot)
• Generic Instructions
• Silicone Optic Shroud

Specifications:

• 1300 Lumen
• IMT Technology
• Aluminium Body
• 200 grams
• Water Resistant (IP65)
• 6.8 AHr Lithium Ion Battery
• 2 X Cree U3 XM-L2 LEDS
• Replaceable Optics
• Appx 2 HR runtime on High (light will begin to dim naturally over time and will last for over 3 hours)
• 5HR Battery minimum charge time (dependent on state of charge)
• Removable USB Remote Switch
• USB Charging
• OTG (On The Go) Charging of other devices
• Bar and Helmet Mount
• Travel Lock Function

• IMT Programmes

  TRAIL – LOW > MEDIUM > HIGH. SPECIAL MODE > SUPER DIM (10 days runtime) (All programmable to user requirements)

  COMMUTE – LOW > HIGH. SPECIAL MODE > FLASH (2HZ – Low/High) (All programmable to user requirements)

  Special modes are activated by holding down the button for 2 seconds. This allows the user to use the light without the need to cycle through the special mode (or off) and therefore interrupting the steady beam of light.

  The light is shutdown by holding the button for approximately 5 seconds. IMT gives the user the flexibility of multiple programme options without being restricted to factory settings.